微波EDA網-關于我們 微波EDA網-出版的圖書專著 微波EDA網培訓課程列表 射頻工程師養成培訓學習教程
  • 1
  • 2
  • 3
  • 4

Defining Mesh Operations

In HFSS, mesh operations are optional mesh refinement settings that provide HFSS with mesh construction guidance. This technique of guiding HFSS’s mesh construction is referred to as "seeding" the mesh. Seeding is performed using the Mesh Operations commands on the HFSS menu. Each mesh operation you define appears in the Project tree.

[spacer]

You can instruct HFSS to reduce the maximum size of tetrahedral elements on a surface or within a volume until they are below a certain value (length-based mesh refinement) or you can instruct HFSS to refine the surface triangle length of all tetrahedral elements on a surface or volume to within a specified value (skin depth-based mesh refinement). These types of mesh operations are performed on the current mesh, that is, the most recently generated mesh.

In a few circumstances, you may also want to create a mesh operation that modifies HFSS’s surface approximation settings for one or more faces. Surface approximation settings are only applied to the initial mesh, that is, the mesh that is generated the first time a design variation is solved.

You can also specify Initial Mesh Settings to apply to all objects; however, if you apply separate surface approximation mesh operations to specific objects, the object settings take precedence over the general setting.

You can also choose to override automatic choice of which mesher HFSS uses, by using the HFSS>Mesh Operations>Initial Mesh Settings command.

See the technical notes for more details about HFSS’s application of mesh operations.

What do you want to do?

• Length Based Mesh Refinement

• Perform length-based mesh refinement on object faces.

• Perform length-based mesh refinement inside objects.

• Perform skin depth-based mesh refinement on object faces.

• Modify surface approximation settings for one or more faces.

• Specify automatic or specified model resolution for a selection.

• Specify the initial mesh settings

Related Topics

Plotting the Mesh

Technical Notes: The Mesh Generation Process

Technical Notes: Seeding the Mesh

Technical Notes: Guidelines for Seeding the Mesh

Technical Notes: Surface Approximation Settings

Getting Started Guides: A Spiral Inductor