- 1
- 2
- 3
- 4
- HFSS15在線幫助
- 首頁
- HFSS教學
- HFSS 15 在線幫助文檔
Specifying Solution Settings > Setting Adaptive Analysis Parameters for HFSS
Setting the Maximum Number of Passes
The Maximum Number of Passes value is the maximum number of mesh refinement cycles that you would like HFSS to perform. This value is a stopping criterion for the adaptive solution; if the maximum number of passes has been completed, the adaptive analysis stops. If the maximum number of passes has not been completed, the adaptive analysis will continue unless the convergence criteria are reached.
To set the maximum number of passes for an adaptive analysis:
• Under the General tab of the Solution Setup dialog box, enter a value for Maximum Number of Passes.
For driven problems HFSS always requiring at least one adaptive pass. Entering 1 will bypass adaptive analysis, generating a solution only at the solution frequency you specified.
Note |
The size of the finite element mesh — and the amount of memory required to generate a solution — increases with each adaptive refinement of the mesh. Setting the maximum number of passes too high can result in HFSS requesting more memory than is available or taking excessive time to compute solutions. |
Related Topics
Adding a Solution Setup to an HFSS Design
Adding an Solution Setup to an HFSS-IE Design
-
國內最全面的HFSS培訓課程，包含7套視頻教程和2本教材，資深專家講解，視頻操作演示，結合最新工程案例，讓HFSS學習不再難...【詳細介紹】
