微波EDA網-關于我們 微波EDA網-出版的圖書專著 微波EDA網培訓課程列表 射頻工程師養成培訓學習教程
  • 1
  • 2
  • 3
  • 4

  Specifying Solution Settings > Setting Adaptive Analysis Parameters for HFSS       

Setting the Order of Basis Functions

You can change the basis functions HFSS uses to interpolate field values from nodal values.

• Under the Options tab of the Solution Setup dialog box, select Order of Basis.

This can be First Order (the default), Zero Order, Second Order, or Mixed order.

Setting the Order of Basis functions affects the default value of the Lambda Refinement in the Solution setups as follows.

[spacer]

Zero order:

driven 0.1,

eigenmode 0.1

First order:

driven 0.3333,

eigenmode 0.2 (as is)

Second order:

driven 0.6667,

eigenmode 0.4

Mixed order

driven 0.6667

eigenmode 0.6667

The Zero order option is useful when a model requires a mesh that produces more than 100,000 tetrahedra, but the model size is small compared to wavelength. The higher order options solve progressively more unknowns for each tetrahedra. Mixed order uses higher order where more accuracy is required, and lower order where fields are weaker.

Warning

If you select Zero Order Solution Basis, all tetrahedra in the model must have edge lengths less than 1/20th wavelength. Thus, this option is usually selected in combination with a specific lambda refinement setting.

Related Topics

Technical Notes: Basis Functions

Setting Lambda Refinement

Enable Iterative Solver