HFSS視頻教程推薦： HFSS培訓教程套裝  |  兩周學會HFSS  |  HFSS微波器件仿真分析實例  |  HFSS雷達散射截面分析  HFSS天線設計  |  PCB天線設計和HFSS仿真分析實例  | HFSS-IE仿真器使用詳解和天線設計實例

 HFSS online help > Setting Up an Optimization Analysis   

Solving a Parametric Setup During an Optimization

Solving a parametric setup during an optimization analysis is useful when you want Optimetrics to solve every design variation specified in the parametric setup at each optimization iteration. A cost function goal could then depend on the value of the variable swept in the parametric setup.

To solve a parametric setup during an optimization analysis:

1. In the Setup Optimization dialog box, click the General tab.

2. In the Parametric Analysis pull-down list, click the parametric setup you want Optimetrics to solve during an optimization.

3. Select Solve the parametric sweep during optimization.

4. Optionally, you can adjust the sweep values to be used during the optimization.

a. Click on the Goal tab, click Setup Calculations to specify a calculation.

The Add/Edit Calculation dialog box is displayed.

b. Click the Calculation Range tab.

c. Click the Edit button for the sweep to be modified.

d. In the pop-up dialog box, select the sweep values to use.

e. Close the pup-up dialog box. Click Done to close the Add/Edit Calculation dialog.

		Ansys HFSS，Ansoft HFSS online help，Version 15.0.	HFSS視頻教程 | HFSS教程專欄 | 射頻工程師培訓培訓課程 : Solving a Parametric Setup During an Optimization'>HFSSComments