HFSS視頻教程推薦： HFSS培訓教程套裝  |  兩周學會HFSS  |  HFSS微波器件仿真分析實例  |  HFSS雷達散射截面分析 

HFSS天線設(shè)計  |  PCB天線設(shè)計和HFSS仿真分析實例  | HFSS-IE仿真器使用詳解和天線設(shè)計實例

 HFSS online help > Running Simulations   

Solving a Single Setup

To run a single setup:

1. Select a solution setup in the project tree.

2. Right-click and select Analyze from the shortcut menu.

HFSS computes the 3D field solution inside the structure. Each solution setup is solved in the order it appears in the project tree.

To run more than one analysis at a time, follow the same procedure while a simulation is running. The next solution setup will be queued and solved when the previous solution is complete.

Note

If a linked dependency in the setup is already simulating (for example, due to setup links to the same external source for a near or far field wave, or a magnetic bias), HFSS will not allow another dependent simulation to start until the first use of the source has completed.

 

To solve two or more sweeps or two or more parametric analyses under a setup:

Configure two or more machines for a distributed analysis. See Solving Remotely for configuration issues, Distributed Analysis for license issues, and Configuring Distributed Analysis for setting up the HFSS General Options.

1. In the project tree, under the design you want to solve, right-click the setup icon that includes the sweeps of interest.

2. Click Analyze on the shortcut menu.

Each solution sweep under that setup is solved in the order it appears in the project tree, using the available machines.


    

Copyright 2009 Ansoft LLC. All rights reserved.

E-mail comments to HFSSComments