HFSS天線設計 | PCB天線設計和HFSS仿真分析實例 | HFSS-IE仿真器使用詳解和天線設計實例
|
HFSS視頻教程推薦： HFSS培訓教程套裝 | 兩周學會HFSS | HFSS微波器件仿真分析實例 | HFSS雷達散射截面分析 HFSS天線設計 | PCB天線設計和HFSS仿真分析實例 | HFSS-IE仿真器使用詳解和天線設計實例 |
HFSS online help > Post Processing and Generating Reports >
Viewing Solution Data >
Viewing Convergence Data
For solutions with ports.
At any time during or after the solution process, you can view the maximum change in the magnitude of the S-parameters between two consecutive passes. This information is available after two or more passes are completed.
To view the maximum magnitude of delta S between passes:
• In the project tree, right-click the solution setup of interest, and then click Convergence on the shortcut menu.
The Solution Data window appears. The Convergence tab is selected.
The Max. Mag. Delta S column lists the maximum magnitude of delta S from one pass to the next.
The Max. Mag. Delta S area lists the target change in magnitude of delta S and the change in magnitude of delta S between the last two solved passes.
Note |
Delta S is computed on the appropriate S-parameters - modal or terminal - after the S-parameters have been de-embedded and renormalized. |
Note |
You can renormalize mathematically, without having to re-solve, by accessing the postprocessing tab on the port definition panel and de-selecting the Deembed selection box. |
Setting the Maximum Delta S Per Pass
Technical Notes: Maximum Delta S
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS視頻教程 | HFSS教程專欄 | 射頻工程師培訓培訓課程 : Viewing the Max Magnitude of Delta S Between Passes'>HFSSComments |